Interface Technology

Transducers and Separatiors

Temperature and humidity data logger with Ethernet and PoE

HT20 data logger has been designed to measure, monitor and record temperature and humidity. It is a perfect solution for any facilities where monitoring and recording such values are very important for the accuracy of the whole process e.g.: in server rooms, drug and food warehouses, laboratories, museums or glasshouses.

Temperature and humidity data logger for IoT applications

HT20IoT data logger has been designed to measure, monitor and record temperature and humidity. It is a perfect solution for any facilities where monitoring and recording such values are very important for the accuracy of the whole process e.g.: in server rooms, drug and food warehouses, laboratories, museums or glasshouses.

3-phase transducer of power network parameters

P43 is destined for the conversion of 3-phase, 3 or 4-wire power network parameters, in balanced or unbalanced systems.

1-phase transducer of power network parameters

Programmable transducer P41 type is destined for conversion into analog or digital signals 1-phase network parameters.

Programmable separator/transducer

P20G separator assures full galvanic isolation of the input, output and auxiliary supply and matching of analog signals in automation systems.

Programmable transducer of a.c. current, voltage or frequency

Measuring transducer P21Z type is destined to a continuous conversion of a.c. current or a.c. voltage without the constant component or frequency into a standard d.c. current or d.c. voltage signal or digital signal. The transducer output signal is galvanically insulated from the input signal and the supply.

Transducer of temperature and standard signals

The P17 transducer is destined to convert the signal from temperature, resistance or voltage sensors into a 4…20 mA current signal.

Transducer of 1-phase power network parameters with Ethernet

P30P is a titransducer which was designed to measure 1-phase power network parameters. It can measure and record up to 16 parameters. The output signal is galvanically isolated from the input signal and the power supply. P30P has programmable measurement and additional functions.

Transducer of pulses, frequency, turns, operation time with Ethernet

Programmable transducer P30O type is destined to convert of number of pulses, number of working hours, frequency, period and rotational speed into a digital or standard current or voltage signal.

Ultrasonic level transducer ULT21

ULT21 transducers are designed to measure distance/level based on ultrasonic technology. Compare to the previous serie of transducer, ULT21 has a wider measuring range - up to 15m and a higher protection grade. IP66 / IP68. Additionally ULT21 can be used to measure the filling of tanks, to count the flow and level measurement in open channels. Built-in LCD display, which, together with the buttons creates a local user interface allows for any change of operating parameters and viewing the current status of the device, including the reading of measured values.

Ultrasonic level sensor ULS10

ULS10 sensors are designed to measure distance/level based on ultrasonic technology. Measuring range, depends on execution is equal 10 or 15m. High protection grade of housing - IP66/IP68 allows to use ULS10 sensor in industrial conditions.

DC transducer/separator

P15 splitter ensures galvanic isolation between input, 2 outputs and the supply circuit. The transducer meets all the requirements concerning EMC according to PN-EN 61010 standard.